250ml Glass Bottle Water Juice Filling Machine / Equipment / Plant
3000BPH
Brief introduction
Model:CGF8-8-3 ; Capacity:3000bottleds per hour, your bottle volume can't larger than 1L
1. It is used to produce polyester bottled mineral water, purified water, alcohol, tea drink and other non-
gas beverage.
2. It can finish all the process such as bottle rinsing, filling and sealing fast and stable in one unit.
3. It can reduce the materials and Outsiders touch time, improve the sanitary conditions, production
capacity and economic efficiency.
4. Rinsing parts: Revolved type bottle washing machine,mainly used to wash bottles for mineral water
and other beverage.New bottles go into the machine through bottle dividing pole.Bottles are held by clips
and turned over onto washing heads.After washing,drain water,bottles go into filling parts by star
wheel.There is a water tray on the washing machine for water recycle.
5. Filling parts:Filling machine adopts German technology,produced by ourselves,obey to normal
pressure filling principle.Float ball control the liquid level,making filling steady.It adopts double guide pole
structure.
6. Capping parts:Capping machine drives revolved plate by gear.Caps go out of the cap storage by
centrifugal effect.At the cap output,there is cap divider.The sensor inspects the quantity,the machine will
stop when no caps.
7. Gearbox type capping unit gives a close structure, keep oil inside also using Egers material for longlife.
You can also adjust the capping rounds according to different caps by adjusting gears below.
8. Host adopt advanced PLC automatic control technology, the key electrical components from famous
company such as Japan's Mitsubishi, France Schneider, OMRON,ABB.
Technique parameter
| Model |
CGF8-8-3 |
| Rinsing Head |
8 |
| Filling Head |
8 |
| Capping Head |
3 |
| Bottle Volume |
350ml~2000ml±10ml |
| Bottle Diameter |
φ50-92mm |
| Bottle Height |
150-310 mm |
| Filling Tolerance |
±2% |
| Cap Size |
28mm and 30mm PE Standard Caps |
| Air Pressure |
0.6MPa |
| Air Consumption |
500 L/min |
| Gas Consumption |
0.4 m3/min |
| Motor Power |
9.18kW |
| Voltage |
380V |
We can also provide you with below production lines
1. bottling minereal/pure water production line (500ml, 1000ml,2000ml);
2. barrel mineral/ pure water production line (3L,5L,10L,19L,)
3. bottling carbonated beverage production line (like coca cola);
4. bottling juice production line;
5. canning beverage production line;
6. glass bottle beverage production line;
7. carbonated beverage and juice production auxiliary plants
Product Tags:
|
|
250ml Volume Glass Bottle Filling Line , 5.88KW Power Fillers For Glass Containers Images
|
